The Innovator

Sale price$42,000.00

The Innovator is a fold-out drone tending unit built to do one thing no competitor can: drop trailer-class capacity into a standard 8' pickup bed — no flatbed required. Full aluminum construction and a hydraulic fold-out deck expand to a 15' × 9'6" flight deck on site, then compress back to 7' 6" wide for transport. Onboard you get a 300-gallon solution tank, 50-gallon mix and freshwater tanks, a Honda-powered pump, a slide-out generator bay, and interior storage sized for a T100 drone. Every hydraulic function — deck, generator slide, mix tank, and the four electric corner jacks — runs off multiple handheld remotes, and a built-in winch lets one person load the drone solo. Made to order, approximately 6 weeks, $42,000.


About

The Innovator

Fits Your 8' Bed:

Every comparable tending unit forces you into a flatbed truck to haul the deck and tank package. The Innovator doesn't. Its hydraulic fold design drops the whole rig into a standard pickup bed, then expands to a full-size flight deck on site — so you run the truck you already own.

  • Compresses to 7'6" wide for transport — fits a standard 8' bed or flatbed
  • Folds out to a 15' × 9'6" aluminum flight deck on site
  • 4 electric corner jacks lift the unit so you back your truck out from underneath — no forklift, no flatbed conversion
  • 7' 8" skid base to top of railing; 5' 7." interior clearance height

One-Person Operation

The Innovator is built so a single operator can run the entire rig from the ground. Every function lives on handheld remotes, and a built-in winch handles the heavy lifting — no second set of hands required.

  • 3 Handheld remotes control every hydraulic function — deck fold, generator slide, mix tank, and jacks
  • Built-in winch loads a T100 drone into interior storage solo
  • Fold-out mix tank drops to the side of the truck for ground-level mixing
  • 4 electric corner jacks for forklift-free loading — plus fork pockets if you'd rather move it with a forklift
  • Pilot area: 3'6" × 7'

Back Field Capability

The Innovator carries a complete tending setup in a truck-bed footprint. Between the tanks, the Honda-powered pump, the slide-out generator bay, and protected interior drone storage, everything the job needs travels with you — no trailer needed.

  • 300 gal solution tank + 50 gal mix tank + 50 gal freshwater tank
  • Honda gas pump engine with 1" plumbing lines
  • Slide-out generator bay: 42" W × 24" D × 30" H, extends for full-access service and refueling
  • Interior storage sized for a T100 drone
  • Full aluminum construction — 2,700 lbs empty

All New

Platinum Trailer

The Ultimate Spray Drone Trailer

Folds Out, Fully Plumbed, Ready to Use

Compact and Capable

The Innovator's 50 gallon Mix Tank folds out and is connected with 1" plumbing. A 300 gallon holding tank sits inward along with an additional 50 gallon fresh water tank.

Looking to fuel up your generator, not a problem, that folds out too!

Let us help you

"Expand" Your Opportunity

The Innovator expands too with a white composite flight deck that is 15ft by 9.6 ft. Plus it's fully illuminated.

With a pilot area 7ft by 3ft, you have plenty of room to move around. grab batteries and store tools.

Pumped Up Performance

Single Operator, Any 8' Bed

The Innovator is built so a single operator can run the entire rig from any standard 8ft bed. All functions live on handheld remotes, and a built-in winch handles the heavy lifting — no second set of hands required.

Full Breakdown Video